Diaphragm Assembly for K-Motor Performance Universal Fuel Pressure Regulator

Description

This Diaphragm Assembly for the K-Motor Performance Universal Fuel Pressure Regulator is complete with internal parts. It is a high quality replacement for fuel pressure regulators or FPR-200-1 and FPR-200.

Features:

• Complete internal parts
• Compatible with fuel pressure regulators FPR-200-1 & FPR-200
• Compatible with old black/purple pressure regulator

Includes: 

• One (1) diaphragm
• One (1) spring with top cap

Installation Note: Installation instructions are not included with the diaphragm, install at your own risk.

Installation Tips:

1. Remove the regulator from the car to open and replace the internal parts.
2. Loosen and remove the top adjuster screw, ball, and nut.
3. Carefully remove the small stainless steel bolts (6-pieces)
4. Take pictures of the spring order before removing it, check how it is installed. Install the new parts in order same as you removed the old ones.
5. Reinstall and carefully tighten the small screws one by one. Do not over tighten. Make sure they are properly installed before reconnecting on the car.
6. Reinstall the the top adjuster screw, ball, and nut.