• 1- Remove the old fuel line
  • 2- Connect the new braided fuel line banjo to fuel filter
  • Reuse the old banjo bolt with the new washers
  • Do not reuse the old washers to prevent future leaks.
  • Do not overtight
Honda Civic and Acura Integra Braided Banjo Fuel Line Installation (4)
  • 3- Once the line is installed to fuel filter run the fuel line under the intake manifold throttle body then connect to fuel rail, reinstall the pressure damper with the new washers
  • 4- Pressure damper must be reused, if you want to delete the pressure damper also you can use aftermarket banjo bolt like the one sold Here
  • Do not overtight

Once installed open the key switch 5 times (do not turn on engine) then check for leaks, if no leaks turn on the engine for 5 to 10 minutes then check for leaks again, if you find leaks tight a little bit more then it should be fine. please note that if you are reusing the old washers it could cause leaks, we highly recommend to use the rubber bonded steel washers included in the package.